The Allen-Bradley 1756-CNBR Series D is a ControlNet redundant bridge module designed for the ControlLogix platform. It facilitates high-speed, deterministic data transfer between controllers and I/O devices over ControlNet networks, supporting both standard and redundant media configurations.
Security policy
We offer many payment options to make your purchasing experience secure, easy and flexible.
Delivery policy
In-stock products: Same day shipping Mon. through Fri. by 6:00 pm EST.
The 1756-CNBR module enables seamless integration of ControlLogix systems with ControlNet networks, providing reliable communication for complex industrial automation applications. Operating at a communication rate of 5 Mbps, it supports up to 64 connections and accommodates a maximum of 99 nodes, ensuring scalability for extensive network architectures. The module offers both scheduled and unscheduled data transfer capabilities, allowing for precise control and timely information exchange. Its redundant media support enhances network reliability by providing alternative communication paths in case of primary network failures. The 1756-CNBR is optimized for use in ControlLogix redundancy systems, presenting diagnostic information via a 4-character display for efficient monitoring and troubleshooting. Installation is straightforward, requiring placement in a ControlLogix chassis with a corresponding power supply.
The Allen-Bradley 889D-F4AC-10 is a 10-meter (32.8 feet) DC Micro (M12) cordset featuring a straight, 4-pin female connector. Designed for industrial automation applications, it ensures secure and reliable connections for various field devices.
The Allen-Bradley 20-HIM-H10 is a 1-meter remote interface cable designed for use with PowerFlex Human Interface Modules (HIMs), facilitating handheld operation and remote connectivity in industrial automation systems.
The Allen-Bradley 2198-KITCON-DSL Series A is a Digital Servo Link (DSL) feedback connector kit designed for Kinetix 5500 servo drives, facilitating efficient motor feedback connections in industrial automation systems.
The Allen-Bradley 1771-IGD is a 16-point TTL (Transistor-Transistor Logic) digital input module designed for the PLC-5 series, facilitating the integration of low-voltage digital signals into industrial automation systems.
The Belden I602455 is a 24-fiber OM1 loose tube indoor/outdoor tray optic cable designed for high-performance data transmission in both indoor and outdoor environments. Its robust construction and compliance with industry standards make it suitable for various applications, including intra-building and inter-building backbones, lashed aerial...
The Allen-Bradley PHOTOSWITCH 90-30-1-B is a fiber optic cable designed for use with compatible photoelectric sensors, enabling precise detection in challenging industrial environments.
The Allen-Bradley 1785-KE Series B is a Data Highway Plus (DH+) to RS-232-C communication interface module, facilitating seamless integration between DH+ networks and RS-232-C devices in industrial automation systems.
The Allen-Bradley 1756-CNB/D is a ControlNet bridge module designed for the ControlLogix® system, facilitating high-speed communication between controllers and I/O devices over a ControlNet network.
The Allen-Bradley 2711P-RN6 Series B is a communication module designed for PanelView Plus 700 to 1500 terminals, enabling connectivity with DH+, RIO, and DH-485 networks. This module facilitates seamless integration and data exchange between human-machine interfaces (HMIs) and various industrial control systems.
The Allen-Bradley 1762-OF4 Series B is a 4-channel analog output module designed for MicroLogix 1100, 1200, and 1400 programmable logic controllers (PLCs), providing precise voltage and current outputs for industrial automation applications.
The Allen-Bradley 1492-DN3TW is a pre-assembled terminal block rail designed for DeviceNet™ networks, facilitating efficient and reliable connections in industrial automation systems.
The Allen-Bradley PHOTOSWITCH 99-52-1 is a 3-foot stainless steel and glass fiber optic cable with a threaded end, designed for use with PHOTOSWITCH photoelectric sensors in industrial applications.
The Pepperl+Fuchs IRI-KHD2-4RX is a control interface unit designed to connect up to four read/write heads within the IDENT-I inductive identification system, facilitating efficient data communication in industrial automation environments.
The Allen-Bradley 871T-H1B12 is a cylindrical inductive proximity sensor designed for industrial applications, offering reliable non-contact detection of metallic objects with a 2 mm sensing range and a 10-30V DC operating voltage.
The HMS Anybus Communicator AB7010-B is a protocol converter designed to connect serial devices to Modbus RTU control systems. It enables seamless integration of RS-232/422/485 devices into Modbus RTU networks without the need for hardware or software modifications to the connected devices.
The Allen-Bradley 1756-CNBR Series D is a ControlNet redundant bridge module designed for the ControlLogix platform. It facilitates high-speed, deterministic data transfer between controllers and I/O devices over ControlNet networks, supporting both standard and redundant media configurations.
